I am looking for some materials.
First I remember reading about someone using a plastic that had a dark outside and a white inside.
Second I am looking for a good outdoor clear coat for wood. One that will hold up in the sun and rain.
Any recommendations would be greatly appreciated.
Thanks John
Materials
Moderators: ddw, al wolford, sbk, Bob, Kayvon
Re: Materials
The Plastic might be ColorCore.
As for the Poly, look for a Marine Grade like Minwax Helmsman.
As for the Poly, look for a Marine Grade like Minwax Helmsman.
Re: Materials
I’m guessing you are looking for 2 ply plastic…. Something that can be engraved, I would do a Google search under “two ply plastic”. As for outdoor finishing applications, there are a couple of things you can use, check out Rockler’s exterior finishes:
http://www.rockler.com/general-finishes ... nish-satin
Or outdoor oil:
http://www.rockler.com/outdoor-oil
Both are good products! You could also use spar varnish, but the 450 probably has the best protection!
http://www.rockler.com/general-finishes ... nish-satin
Or outdoor oil:
http://www.rockler.com/outdoor-oil
Both are good products! You could also use spar varnish, but the 450 probably has the best protection!