Layers
Moderators: al wolford, sbk, Bob, Kayvon
Re: Layers
Are you talking about putting text on top of some other text with them at different heights?
PMB
http://benchmark.20m.com
PMB
http://benchmark.20m.com
Re: Layers
I'm not sure if that is what Mike is asking about, but I would like to know. I have tried to figure this out several times and just can't get it right. Any help would be appreciated.
Thanks,
Tom
Thanks,
Tom
Re: Layers
Phil
Thats what I was looking for, to get letters atop at differnt cut heights.
Thats what I was looking for, to get letters atop at differnt cut heights.
Re: Layers
I hope this doesn't turn out to require Aspire
CNC Shark HD ~ Control Panel 2.0 ~ Windows 7 & XP
Located in West Tennessee near the Tennessee River
http://www.eaglecarver4.com
Located in West Tennessee near the Tennessee River
http://www.eaglecarver4.com
Re: Layers
No, this can easily be accomplished with VCP (or Aspire) using only 2D toolpaths.
Big steps are to create the text you want and get it properly positioned.
Select the text, right click and use the Copy to Layer command to send a copy to a new layer. Make this layer invisible for now.
Select the border and the smaller text and create a shallow pocket toolpath. In the example I used a cut depth of 0.1".
Open the Layer Manager and make the second layer with text visible and active by checking the box and clicking on the layer name to highlight it.
Select all the text and convert to curves using the right click menu.
Now you will use the Weld Selected Vectors tool (icon is in the Edit Objects section) to join the small text with the large text but there is one thing to be careful of - after you select all the text, hold down the shift key and deselect all the "islands" in the letters unless they touch a part of the text you are welding to. If you don't do this, the islands will disappear when you weld, but you can simply do an undo and try again. When you have all the vectors selected/deselected click on the Weld tool icon.
When happy, select the border again and this newly created shape and calculate a slightly deeper pocket toolpath. I used 0.2" in the example.
Tim
Big steps are to create the text you want and get it properly positioned.
Select the text, right click and use the Copy to Layer command to send a copy to a new layer. Make this layer invisible for now.
Select the border and the smaller text and create a shallow pocket toolpath. In the example I used a cut depth of 0.1".
Open the Layer Manager and make the second layer with text visible and active by checking the box and clicking on the layer name to highlight it.
Select all the text and convert to curves using the right click menu.
Now you will use the Weld Selected Vectors tool (icon is in the Edit Objects section) to join the small text with the large text but there is one thing to be careful of - after you select all the text, hold down the shift key and deselect all the "islands" in the letters unless they touch a part of the text you are welding to. If you don't do this, the islands will disappear when you weld, but you can simply do an undo and try again. When you have all the vectors selected/deselected click on the Weld tool icon.
When happy, select the border again and this newly created shape and calculate a slightly deeper pocket toolpath. I used 0.2" in the example.
Tim
- Attachments
-
- Layed text example.crv
- (1.45 MiB) Downloaded 630 times
Re: Layers
Thanks Tim
Re: Layers
Tim,
That's a long cutting time. How would it be with a bigger bit?
Tony
That's a long cutting time. How would it be with a bigger bit?
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 12.010, photo vcarve, cut3D.cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 12.010, photo vcarve, cut3D.cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: Layers
Hi Tony,
Yes, you are correct for how I did this simple sample. Since my goal was to show the technique of welding designs together and the project size was small, I just selected a very small bit to get the detail and let people preview the results with only two toolpaths.
Your bit selection would depend on the size of your project and it is easy to see how a particular size bit will work by using the Solid feature in the toolpath preview. Most likely the best approach will be to use the Larger Area Clearance Tool feature of the pocket toolpath and hog out the large areas with a larger bit and capture the detail with a smaller bit.
Tim
Yes, you are correct for how I did this simple sample. Since my goal was to show the technique of welding designs together and the project size was small, I just selected a very small bit to get the detail and let people preview the results with only two toolpaths.
Your bit selection would depend on the size of your project and it is easy to see how a particular size bit will work by using the Solid feature in the toolpath preview. Most likely the best approach will be to use the Larger Area Clearance Tool feature of the pocket toolpath and hog out the large areas with a larger bit and capture the detail with a smaller bit.
Tim