photo v carve laser post processor
Moderators: ddw, al wolford, sbk, Bob, Kayvon
photo v carve laser post processor
Anyone have a laser postp for the cnc piranha that works in photo v carve. have tried all of the postp on next wave automation web site and all give an error.
Re: photo v carve laser post processor
I would have you use the post processor for the shark should work fine on the PhotoVcarve.
However PhotoVcarve has nothing to do with laser. It controls the depth of the Z in relationship to the darkness of the color when carving with a router.
If you are trying to etch a photo then I would use the Piranha control panel that has that function built into it.
you can download it here
http://shop.nextwaveautomation.com/shop ... x?recid=29
This control panel will also connect to the sharks for those that would like to use a laser on there sharks.
However PhotoVcarve has nothing to do with laser. It controls the depth of the Z in relationship to the darkness of the color when carving with a router.
If you are trying to etch a photo then I would use the Piranha control panel that has that function built into it.
you can download it here
http://shop.nextwaveautomation.com/shop ... x?recid=29
This control panel will also connect to the sharks for those that would like to use a laser on there sharks.