Chess board project - Seahorse Knight

Share your Shark projects with other forum members!

Moderators: sbk, al wolford

Forum rules
Do not post any files that violate copyright or licensing guidelines. Any post violating this rule will be deleted and the member may be banned from future use of cncsharktalk.

Re: Chess board project - Seahorse Knight

Postby rcrick » Mon Jan 15, 2018 9:27 am

Sawman
Keep on asking questions that is how we learn
Rick
User avatar
rcrick
 
Posts: 68
Joined: Fri Jul 27, 2012 8:31 pm
Location: Toledo,Ohio (Home of the Shark)

Re: Chess board project - Seahorse Knight

Postby Kayvon » Mon Jan 15, 2018 10:36 am

Sawman wrote:I am sorry for having to ask a ? not all of us have a a great education like you thats why we ask its a forum not a creative writing site.I thought a place where no one criticizes what you ask for just help

Please, keep asking questions. We all appreciate the questions and we're here to help. I had asked if you would format your posts into questions not to ridicule, but because it's really, really difficult to read your post otherwise.

We want to give you the best answers possible and the best way to do that is ensure that everyone understands your questions.
User avatar
Kayvon
 
Posts: 322
Joined: Tue Oct 21, 2014 11:46 pm

Re: Chess board project - Seahorse Knight

Postby dbowlin » Tue Jan 16, 2018 6:30 am

I had a similar issue with my Piranha which has 3" of travel. One problem was ithe z clearance in the files was set fo 1.86" clearance. When I tried to run the tap file my router would rise past my stops and you could here the gears chattering, than it would drive the bit straight down and bore a hole in the work piece headed through the spoil board. EPO saved the machine top not the lumber.
With all that said, my fix was smaller fixture bottom board with no spoil board between it. I also planned my lumber to 1.44" thick and recalculated the chess piece size in the V9 software and proceeded to cut the Sea Horse and the Pawn.
I used a piece of 1/2" Baltic birch plywood for the bottom fixture board. This still is very close to my Z clearance of 3" with a .1 to .2 " setting for my settings. I am thinking I will use 1/4" plywood for the fixture bottom.
I hope this helps you out.
My 2 cents worth, tech support helped me identify my problem I came up with my fix. Knowing what the cause was a big help. Nextwave Tech Support has been GREAT!
Dale
dbowlin
 
Posts: 1
Joined: Sat Mar 18, 2017 7:16 pm

Previous

Return to Shark Project File Sharing.

Who is online

Users browsing this forum: No registered users and 2 guests

cron