Butt Impression Please
Moderators: ddw, al wolford, sbk, Bob, Kayvon
Butt Impression Please
I Figure on making some stools with butt impression seats (carved chair seats) but I do not have any ideas on dimensions (what is considered standard (is there such a thing?)).
Probably use VCarve, 3D carving and a round bull nose bit to do most of the work. Only guessing here.
Can't find any Youtube about Vetric and chair bottoms. I may check out how to do spoons and go from there.
Ideas and help please.
Probably use VCarve, 3D carving and a round bull nose bit to do most of the work. Only guessing here.
Can't find any Youtube about Vetric and chair bottoms. I may check out how to do spoons and go from there.
Ideas and help please.
Re: Butt Impression Please
With nothing that I could find to go on, I started to draw something symmetric.
I'm still looking for suggestions here.
Figuring something like 24" wide, 20" deep on a 2" thick board but only cutting 1" deep, this is what I came up with. Interesting enough, I figure I'll have to carve it and try it out for me to know if it is even close.
I'm still looking for suggestions here.
Figuring something like 24" wide, 20" deep on a 2" thick board but only cutting 1" deep, this is what I came up with. Interesting enough, I figure I'll have to carve it and try it out for me to know if it is even close.
-
- Posts: 409
- Joined: Tue Mar 08, 2016 5:23 pm
Re: Butt Impression Please
Something like this?
Sharkcutup
I have some tractor seat models at hogancnccrafts.com that might help.Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
Re: Butt Impression Please
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: Butt Impression Please
Yes Sharkcutup. What are the dimensions? How wide, long and deep? The dimensions will really help me.sharkcutup wrote:Something like this?I have some tractor seat models at hogancnccrafts.com that might help.
Sharkcutup
Thanks.
Re: Butt Impression Please
hogancnccrafts.com, fake site, don't work
Tony
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: Butt Impression Please
Bill Z take a look here and download the filesBuffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
-
- Posts: 409
- Joined: Tue Mar 08, 2016 5:23 pm
Re: Butt Impression Please
17" x 17" x 2.0"
Sharkcutup
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
Re: Butt Impression Please
Thank you very muchtonydude wrote:Here you go just page down for the seats. http://www.designsbyphil.com/3d-file-share.htmlparis airports transfers
Tony