Is there anyone out there who knows what the total Wattage of the Shark Pro Plus HD3 machine is? Also does anyone have any idea as to the wattage of the 2hp Spindle and Inverter (110V 13amp) Kit?
I am looking to put a UPS battery backup & surge protector on my total system (computer, shark CNC (stepper motors) & controller, 2hp spindle & Inverter and the cooling pump).
I need this because over time I have found that my home is on a block of the city with the weakest current link (example: neighbors across the street would have power & neighbors a block over from neighbors behind my house would have power, but my block would NOT have POWER. Power outages on clear sunny days!!! Need an efficient & safe way to shut down everything down when there is a power outage!
Thank Everyone!
Mike
ups battery backup & surge protector for Shark HD3
Moderators: al wolford, sbk, Bob, Kayvon
-
- Posts: 409
- Joined: Tue Mar 08, 2016 5:23 pm
ups battery backup & surge protector for Shark HD3
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
Re: ups battery backup & surge protector for Shark HD3
Only observations I have made so far:
This is measured from the Tripp-Lite Smart 3000 UPS
Running a Pocket toolpath with .125 End Mill on Foam - 100IPM
Everything running - 120v:
Shark HD4
H2O Spindle 120V
H2O Pump
Led light - 12v 1Amp Transformer
The highest Wattage seen was 167 Watts
Thinking that if cutting more than foam it might be higher.
Edit - 12k RPM
When I increased RPM to 17k it jumped to 172 Watts
Roughly 1.5 Amps
This is measured from the Tripp-Lite Smart 3000 UPS
Running a Pocket toolpath with .125 End Mill on Foam - 100IPM
Everything running - 120v:
Shark HD4
H2O Spindle 120V
H2O Pump
Led light - 12v 1Amp Transformer
The highest Wattage seen was 167 Watts
Thinking that if cutting more than foam it might be higher.
Edit - 12k RPM
When I increased RPM to 17k it jumped to 172 Watts
Roughly 1.5 Amps
Shark HD4 EB
Maker of Sawdust
Maker of Sawdust
-
- Posts: 409
- Joined: Tue Mar 08, 2016 5:23 pm
Re: ups battery backup & surge protector for Shark HD3
Thank you for the information WNC_Ed
Sharkcutup
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554